Applications :
General introduction STD4 * Series Terminal Apparatus Combination Units are constructed with novel style,artistic outward,mild lustre,compact volume,and light weight.The enclosure is made of flame-retardant high-grade project plastics with high shock resistance.They suit for the needs of modern building and family decoration on performance and outward appearance of low-voltage terminal combinaton unit.Combination Unit is comprised of enclosure,cover,front door,earthing bar,neutral bar,mounting rail,etc. When gently push the opening key,the front door will be opened automatically.Power pilot is designed on the cover,and the knock-out holes are located on four sides of the enclosure for convenient installation.STD4 * Series Terminal Apparatus Combination Units are classified to STD41 Type and STD42 Type according to combined electrical elements. Model STD42 Terminal Apparatas Combination Units,selecting DZL199 Miniature Circuit Breaker as the inner combination elements,are designed with compact volume,larger space in the enclosure,convenient connection.They are suitable for AC 50Hz illuminating and small dynamic electric circuit in single phase,three wire system with rated voltage 230V,rated current up to 32A.used to protect against earth leakage,overload and short-circuit,and for unfrequent making and breaking of circuit.Simultaneous open of phase pole and neutral pole complys with the requirement of circuit breaker for shunt circuit protection according to shanghai municiple standard(Design standard of residence building)(DBJ08-20-98). The Combination units may be widely used in commercial buildings,residences and similar sites. | 型号说明:
STD41 系列终端组合电器品种规格及主要技术性能见表1 Specification and main technical performance of Model STD41 Terminal Apparatus Combination Unit are given in table 1
型号 Type |
可安装的单元数 (每单元宽为18mm) Number of mountable elements (Width 18mm/element) |
额定电流 Rated current (A) |
额定电压 Rated voltage (V) |
短路强度 Short-circuit capacity |
防护等级 Degree of protection IP |
开门方式 Opening mode of the door |
内部元件安装方法 Mounting method of inner elements |
STD41-6 |
6 |
100 |
230/400 |
10000 |
40 |
|
轨道式 Rail mounting
|
STD41-12 |
12 |
STD41-16 |
16 |
STD41-24 |
24 |
STD41-32 |
32 |
主要元件和技术参数见表2 Inner elements and technical parameters are shown in table 2
HG6-32 熔断器式隔离器 Fuse-disconnector
|
额定电流 Rated current(A) |
32 |
熔断体额定电流 Rated current of fuse-link(A) |
2,4,6,10,16,20,25,32 |
额定电压 Rated voltage(V) |
230/400,400 |
额定限制短路电流 Reted conditional short-circuit current(A) |
20000 |
极数 Number of poles |
1P,2P,3P |
DZ126系列小型短路器 Miniature Circuit Breaker |
额定电流 Rated current(A) |
6,10,16,20,25,32,40,50,63,80,100 |
额定电压 Rated voltage(V) |
230/400,400 |
额定短路分断能力 Rated short-circuit breaking capacity(A) |
6000,10000 |
极数 Number of poles |
1P,2P,3P,4P,1P+N,3P+N |
DZ126L系列漏电断路器 Residual Current Circuit Breaker |
额定电流 Rated current(A) |
6,10,16,20,25,32,40,50,63 |
额定电压 Rated voltage(V) |
230/400,400 |
额定漏电动作电流 Rated residual operating current(A) |
0.03 |
额定短路分断能力 Rated short-circuit breaking capacity(A) |
6000,10000 |
极数 Number of poles |
1P+N,2P,3P,4P,3P+N |
STD42 型终端组合电器品种规格及主要技术性能见表3
Specification and main technical performance of Model STD42 Terminal Apparaus Combination Unit are given in table 3
型号 Type |
可安装的单元数 (每单元宽为32mm) Number of mountable elements (width 32mm/element) |
额定电流 Rated current (A) |
额定电压 Rated voltage (V) |
防护等级 Degree of protection IP |
开门方式 Opening mode of the door |
内部元件安装方法 Mounting method of inner elements |
STD42-4 |
4 |
32 |
230 |
40 |
|
螺钉式 Screw Mounting |
STD42-6 |
6 |
STD42-9 |
9 |
STD42-13 |
13 |
STD42-20 |
20 |
内部元件及主要技术参数见表4 Inner elements and technical parameters are shown in table 4
|
频率 Frequency (Hz) |
极数 Number of poles |
过电流脱扣器额定电流 Reted current of the release (A) |
额定漏电动作电流 Rated residual operating current (A) |
额定漏电不动作电流 Rated residual non operating current (A) |
额定漏电动作电流式的分析时间
|
额定限制短路分断能力 Rated conditional short-circuit breaking capacity |
230 |
50 |
1P+N |
6,10,16,20,25,32 |
15 |
7.5 |
≤0.1 |
3000 |
30 |
15 |
注:DZL199-32微型漏电断路器可以派生出不带漏电保护的过电流保护断路器,详细请参见本产品样本中有关产品介绍。 Note:DZL199-32 Miniature Residual Current Circuit Breaker may be derived to form Circuit Breaker only for overload protection,without residual current protection.
外形尺寸和安装尺寸:
|